4-7mm FO 및 9-14mm 전원 케이블 용 안테나 피더 클램프
Antenna Feeder Accessories | Clamp Hanger for 4-7mm FO and 9-14mm Power Cable Clamp hanger is the main part of whole antenna feeder accessories, used to fix rru cable 4-7mm plus electric power cable diameter ranging from 9-14mm. Each unit of the clamp hanger holds one run of 4-7mm rru cable and one run of electric power cable. The rubber inserts inside the clamp hanger are made from EPDM rubber, which has excellent UV resistance, weather resistance and heat resistance. The rubber inserts are pre-attached to each half of hanger, ...
7mm 광섬유 케이블 클램프
제품 설명 7mm 광섬유 케이블 클램프는 7mm 와이어 케이블을 고정하도록 설계되었습니다. 단일 스택, 이중 스택 및 트리플 스택으로 나뉩니다. 행거의 각 장치에는 7mm 케이블 2 줄이 있습니다. 단일 클램프는 2 개의 7mm 케이블을 고정 할 수 있고, 이중 클램프는 4 개의 7mm 케이블을 고정 할 수 있으며, 트리플 클램프는 6 개의 7mm 케이블을 고정 할 수 있습니다. 광섬유 케이블 클램프의 금속 부분은 304 스테인리스 스틸로 만들어졌으며 플라스틱 행거는 개선 된 폴리 프로필렌 (PP)으로 만들어졌습니다. 향상된 PP는 ...
Power Fiber Optic Cable Clamp 7mm and 14mm
Product Description Power & Fiber Optic Cable Clamp 7mm and 14mm is combined cable clamp, it's designed to hold 7mm and 14mm power cable. Each unit of hanger holds one run of 7mm cable and one run of 14mm cable. The rubber insert inside is pre-attached to the hanger itself, which is more convinient for installers to operate during installation. The metallic parts of the cable clamp are made of 304 stainless steel and the plastic parts are made of improved polypropylene (PP). The improved PP is to improve ...
3/8 ″ 및 7mm 용 케이블 클램프
Product Description The cable clamp is 3 hole type, one hole is for 3/8" cable and the other two holes have rubber inserts inside to fix 7mm OD cable. Each unit of hanger can fix one 3/8" cable and two 7mm cables. We provide single stack, double stack and triple stack for different installation options. The metallic parts of the clamp are made of 304 stainless steel and the plastic parts are made of improved polypropylene (PP). The improved PP is to improve the properties of flame retardancy, heat ...
텔레콤 전력 케이블 클램프 7mm 및 21mm
Product Description In 4G/5G networking, more and more combined clamps are required to fix both electric power cables and fiber optic cables. Fiber optic cables usually vary among 5-11mm OD and electric power cables usually vary among 10-24mm OD. The cable clamp is specifically designed for 7mm OD cables and 21mm OD electric power cables. Each unit of hanger can hold two runs of 7mm cables and one run of 21mm cable. The metallic parts of the clamp are made of 304 stainless steel and the plastic parts are ...