Whipcheck Safety Sling for Hoses

호스용 휩체크 안전 슬링

Whipchecks will be needed when working with high pressure and in low visibility situations. If a blast, bull, or other hose connection point was to become disconnected accidentally, the high pressure in the hose would cause the hose to whip or snap around and lash out at anything in its path.

There are 4 minimum locations where whipchecks should be installed:

• 공기 압축기에서 불호스까지

• 분사기 입구

• 입구 및 출구 연결

• 호스상의 연결 지점

Whipcheck Safety Sling
부품 번호	기술	재료	Pressure Rating (PSI)
Standard
WCH1	1/8" Wire for Hose 1/2" to 1 1/4", 20 1/4" Long	Steel wire with Aluminium ferrules	200
WCH2	3/16" Wire for Hose 1/2" to 2", 28" Long	Steel wire with Aluminium ferrules	200
WCH3	1/4" Wire for Hose 1 1/2" to 3", 38" Long	Steel wire with Aluminium ferrules	200
WCH4	3/8" Wire for Hose 4", 44" Long	Steel wire with Aluminium ferrules	200
Copper Ferrules
WCH1C	1/8" Wire for Hose 1/2" to 1 1/4", 20 1/4" Long	Steel wire with Copper ferrules	200
WCH2C	3/16" Wire for Hose 1/2" to 2", 28" Long	Steel wire with Copper ferrules	200
WCH3C	1/4" Wire for Hose 1 1/2" to 3", 38" Long	Steel wire with Copper ferrules	200
WCH4C	3/8" Wire for Hose 4", 44" Long	Steel wire with Copper ferrules	200
Stainless Steel
WCH1SC	1/8" Wire for Hose 1/2" to 1 1/4", 20 1/4" Long	Stainless Steel with Copper ferrules	200
WCH2SC	3/16" Wire for Hose 1/2" to 2", 28" Long	Stainless Steel with Copper ferrules	200
WCH3SC	1/4" Wire for Hose 1 1/2" to 3", 38" Long	Stainless Steel with Copper ferrules	200
WCH4SC	3/8" Wire for Hose 4", 44" Long	Stainless Steel with Copper ferrules	200