Serre-câbles en acier inoxydable

SS304 Telecom Tower Cable Clamp for 1/2" Jumper SS304 telecom tower cable clamp for 1/2" jumper is designed and supplied to fix 1/2" jumper cable, each unit of the cable clamp has two holes and can accept up to six runs of 1/2" cables with a single complete clamp set. The metallic parts of the clamp are made from 304 stainless steel and the plastic hangers are made from improved polypropylene (PP). We provide single stack, double stack and triple stack for different installation options. Product Specification Cable Size: 1/2" ...

Product Description Click on type coaxial cable clamp has specific locking mechanism and you will hear "click" when the clamp is installed correctly. We provide click on type clamps for 1/2", 7/8", 1-1/4" and 1-5/8" cable. The metallic parts can be 304 stainless steel or dacromet coating steel. And the plastic hangers are made from POM, which has excellent physical and mechanical properties and is one of the varieties of metal materials in plastics. It has good dimensional stability, excellent water resistance, oil resistance, chemical resistance and wear ...

Product Description Click on type coaxial cable clamp has specific locking mechanism and you will hear "click" when the clamp is installed correctly. The metallic parts can be 304 stainless steel or dacromet coating steel. And the plastic hangers are made from POM, which has excellent physical and mechanical properties and is one of the varieties of metal materials in plastics. It has good dimensional stability, excellent water resistance, oil resistance, chemical resistance and wear resistance. Click on 1/2 inch coaxial cable clamp has one way, two way and ...

Product Description RE60 waveguide cable clamp is designed specifically for RFS elliptical waveguide RE60. It features a rubber lining inside to hold the cable tightly, keeping from any damages to the outer cable. The metallic parts of the cable clamp are made of 304 stainless steel and the rubber lining is made of EPDM rubber, it has excellent UV resistance, weather resistance and heat resistance. Technical Specification Cable Size: RE60 Hanger Type: Hoop Number of Cables: 1 Axial Load Capability: 5 times cable weight Corrosion Resistance: 96 hours in salt ...

Product Description Waveguide Cable Clamps are widely used in site installation to fix elliptical waveguide cables. The cable clamp will provide an efficient way of managing and securing to cable installation system. EW63 waveguide cable clamp is designed specifically for elliptical waveguide ew63. It features a rubber lining inside to hold the cable tightly, keeping from any damages to the outer cable. Technical Specification Cable Size: EW63 Hanger Type: Hoop Number of Cables: 1 Axial Load Capability: 5 times cable weight Corrosion Resistance: 96 hours in salt spray ...

Product Description Waveguide Cable Clamps are widely used in site installation to fix elliptical waveguide cables. The cable clamp will provide an efficient way of managing and securing to cable installation system. EW52 waveguide cable clamp is designed specifically for elliptical waveguide ew52. It features a rubber lining inside to hold the cable tightly, keeping from any damages to the outer cable. Technical Specification Cable Size: EW52 Hanger Type: Hoop Number of Cables: 1 Axial Load Capability: 5 times cable weight Corrosion Resistance: 96 hours in salt spray ...

Product Description In 4G/5G networking, more and more combined clamps are required to fix both electric power cables and fiber optic cables. Fiber optic cables usually vary among 5-11mm OD and electric power cables usually vary among 10-24mm OD. The cable clamp is specifically designed for 7mm OD cables and 21mm OD electric power cables. Each unit of hanger can hold two runs of 7mm cables and one run of 21mm cable. The metallic parts of the clamp are made of 304 stainless steel and the plastic parts are ...

Product Description Outdoor stainless steel cable clamp for 1-5/8 inch feeder is double hole type, each unit of clamp can fix two 1-5/8" cables and can be stacked up to six 1-5/8" cables. The stainless steel cable clamp is divided into two run, four fun and six run for different installation requirements. The clamp set ensures long term integrity in extreme environments including mountain tops, deserts and industrial applications. Technical Specification Cable Size: 1-5/8" Hanger Type: Double hole Number of Cables: 2 / 4 / 6 Axial Load Capability: ...

Product Description Outdoor Stainless Steel Cable Clamp for 1-1/4 inch Feeder The metallic parts of the clamp are all made of 304 stainless steel and the plastic parts are made of improved polypropylene (PP). The improved PP is to improve the properties of flame retardancy, heat resistance, temperature resistance, dimensional stability and rigidity. Technical Specification Cable Size: 1-1/4" Hanger Type: Double hole Number of Cables: 2 / 4 / 6 Axial Load Capability: 5 times cable weight Corrosion Resistance: 96 hours in salt spray chamber Mounting: M8 / 3/8" ...

Product Description Outdoor stainless steel cable clamp for 7/8 inch feeder is double hole type, each unit of clamp can fix two 7/8" cables and can be stacked up to six cables. The stainless steel cable clamp is divided into two run, four fun and six run for different installation requirements. The clamp set ensures long term integrity in extreme environments including mountain tops, deserts and industrial applications. The metallic parts of the clamp are all made of 304 stainless steel and the plastic parts are made of improved polypropylene ...

Product Description Outdoor Stainless Steel Cable Clamp for 1/2 inch Superflex Feeder The clamp set consists of two parts, metallic parts and plastic parts. The metallic parts of the clamp are all made of 304 stainless steel and the plastic parts are made of improved polypropylene (PP). The improved PP is to improve the properties of flame retardancy, heat resistance, temperature resistance, dimensional stability and rigidity. Each unit of the clamp can fix two runs of 1/2" superflex cables and can be stacked up to six runs. Technical Specification Cable ...

Product Description Outdoor stainless steel cable clamps for 1/2 inch feeder are widely chosen to fix transmission lines, every single stack can fix two runs of 1/2" cables and can be up to six runs of 1/2" cables usually. The metallic parts of the clamp are all made of 304 stainless steel and the plastic parts are made of improved polypropylene (PP). The improved PP is to improve the properties of flame retardancy, heat resistance, temperature resistance, dimensional stability and rigidity. Technical Specification Cable Size: 1/2" Hanger Type: Double hole ...

Product Description The stainless steel cable clamp is double hole type, each unit of hanger can fix two runs of 3/8" cables and can be stacked up to fix six 3/8" cables. The cable clamp is divided into two run, four fun and six run for different installation requirements. The metallic parts of clamp set are all made of 304 stainless steel and the plastic parts are made of improved polypropylene (PP). The improved PP is to improve the properties of flame retardancy, heat resistance, temperature resistance, dimensional stability ...

Product Description The feeder clamp is designed and manufactured to fix & hold 5d-fb cable, it is divided into one way, two way, three way and four way for customer's specific installation choice. One way cable clamp is used to hold & fix one run of 5d-fb cable. Two way cable clamp is used to hold & fix two runs of 5d-fb cable. Three way cable clamp is used to hold & fix three runs of 5d-fb cable. Four way cable clamp is used to hold & fix four runs of ...

Description du produit Le serre-câble rg8 est de type à un trou et est conçu pour maintenir et fixer le câble rg8, il convient également au câble 3/8 ", au câble lmr400 ou à tout autre câble de 10,3-11 mm de diamètre extérieur. L'ensemble de pinces est divisé en un sens, deux pour répondre aux exigences d'installation spécifiques du client. Nos serre-câbles rg8 sont conçus et fabriqués pour assurer l'intégrité à long terme dans les environnements extrêmes, y compris les sommets des montagnes, les déserts et les applications industrielles. Les pièces métalliques sont toutes en acier inoxydable 304 et les ...

Product Descripton Single hole type 1-5/8" feeder cable clamp is designed to fix 1-5/8" feeder, it is made of 304 stainless steel and improved polypropylene (PP). It can ensure long term integrity in extreme environments including mountain tops, deserts and industrial applications. We also supply feeder cable clamps for 1/4", 3/8", 1/2", 7/8", 1-1/4" and elliptical waveguide. We provide a great variety of clamp types such as leaky type, ring type, wall type to meet different installation requirements. Technical Specification Cable Size: 1-5/8" Hanger Type: Single hole Number ...

Product Descripton Single hole type 1-1/4" feeder cable clamp is designed to fix 1-1/4" feeder, it is made of 304 stainless steel and improved polypropylene (PP). It can ensure long term integrity in extreme environments including mountain tops, deserts and industrial applications. Technical Specification Cable Size: 1-1/4" Hanger Type: Single hole Number of Cables: 1 / 2 / 3 Axial Load Capability: 5 times cable weight Corrosion Resistance: 96 hours in salt spray chamber Mounting: M8 spanner Operating Temperature: -40°C to 85°C UV Resistance: 100 hours exposure in ...

Product Descripton Single hole type 7/8" feeder cable clamp is widely used in the cable installation of base station infrastructure, it's designed to hold and fix the main feeder cable 7/8". The clamp set is divided into one way, two way and three way to hold one run, two runs and three runs of 7/8" cable accordingly. Our feeder cable clamps are designed and manufactured to ensure long term integrity in extreme environments including mountain tops, deserts and industrial applications. We also provide a great variety of clamp ...