Silicone Rubber Cold Shrink Tube 4.3/10 Connector to 1/2" Jumper
Cold shrink tube is a specially formulated tubular rubber sleeve pre-expanded on a removable plastic cylinder for easy installation, it does not require heat to shrink. You just need to pull the plastic cord, then the silicone rubber tubing will shrink rapidly and grip around the cable tightly, providing a reliable, long-term sealing and protection to connectors.
In certain applications, a foam tape will be needed for smaller cable diameter cannot be covered with the tube range, the foam tape is used to increase the smaller cable diameter and assure the sealing of the clod shrink tube.
Applications
» Provides excellent physical protection and moisture sealing for telecom connectors and cables
» Perfect application for remote radio unit connections
» Cable jacket and sheath repairs
» Corrosion protection for fittings and couplings
Product Features:
» Easy and Quick installation
» Does not require any tools or heat
» Provides good thermal stability
» Accommodates a broad range of cable sizes
» Excellent tear resistant
» UV and ozone resistant
Product Properties
Hardness | 49 Shore A |
Tensile Strength | 11.8 MPa |
Elongation at Break | 997% |
Tear Strength | 49N/mm |
Dielectric Strength | 19.1KV/mm |
Heat Aging | Pass |
UV Aging | Grey scale grade 3-4 |
Product Code for Ordering
Product Code | Inner Diameter | Cable Range | Length after Shrink |
SCS45-152 | 45mm | 13.5-39mm | 152mm |
SCS45-178 | 45mm | 13.5-39mm | 178mm |
SCS45-203 | 45mm | 13.5-39mm | 203mm |
SCS45-254 | 45mm | 13.5-39mm | 254mm |
SCS45-305 | 45mm | 13.5-39mm | 305mm |
Quick Information
Product Code: SCS45-152
Material: Silicone rubber
Inner Diameter of Plastic Core: 45mm
Cable Range: 13.5-39mm
Length after Shrink: 152mm
Application: Sealing 1/2" cable (4.3/10, 7/16DIN, N type) to antenna
MOQ: 500
Sample Offered: Free at our cost
Shipment Method: Sea way, air way, DHL, UPS, FedEx, etc.
Port of Shipment: Shanghai, China