Silicone Cold Shrink Tube
Cold shrink tube is an ideal sealing product for communication cables, coaxial cables, medium and low voltage power cables. Our cold shrink tubes are designed for IP68 weatherproof protection on connections between jumper cable and rf connector (7-16 DIN, N type or mini din 4.3-10) of wireless equipment, such as RRU, Antenna and Microwave.
Features
» Easy and quick installation
» Does not require any tools or heat
» Provides good thermal stability
» Accommodates a broad range of cable sizes
» Excellent tear resistant
» UV and ozone aging resistant
Note: In certain applications, a foam tape will be needed for smaller cable diameter that cannot be covered with the tube range, the foam tape is used to increase the smaller cable diameter and assure the sealing of clod shrink tube.
Properties
| Item | Parameter and Result | Test Method | |
| Waterproof | Class | Pass, IPX7 | IEC 60529:1989/AMD2:2013/COR1:2019 1 meter depth in water, duration: 30 minutes |
| Physical and mechanical properties | Shore Hardness | A/41/1 | ASTM D2240-15 |
| Tensile Strength | 9.66 MPa | ASTM D412-16 Method A | |
| Elongation | 930% | ASTM D412-16 Method A | |
| Tear Strength | 28.4 N/mm | ASTM D624-00 | |
| Brittleness Temperature by Impact | Pass | ASTM D746-14，-60℃ | |
| Electricity | Dielectric Strength | 19.10 KV/mm | ASTM D149-20 Method A |
| Material | Environmental Protection | RoHS Reach | IEC 62321 SVHC |
How to install Cold Shrink Tube
Quick Information
Manufacturer: Volda
Brand: Volda
Place of Origin: Jiangsu, China
Product Name: Silicone Cold Shrink Tube
Material: Silicone rubber
MOQ: 1000
Sample Offered: Free at our cost
Shipment Method: Sea way, air way, DHL, UPS, FedEx, etc.
Port of Shipment: Shanghai, China
